102 You may supply a callback location to connect to %1.\nSpecify the phone number of your current location.
103 Enter your password to connect.
104 You may supply a callback location to connect to %1.\nSelect or enter a phone number where %1 can call you back.
105 %1
106 You have modified the phone number.\nClick OK to return to the old phone number, and then use Dialing Properties to modify it.\nClick Cancel to use the modified number.
107 Connect To
108 Windows 95;Windows NT;
109 My Connection
120 Initializing...
121 Accessing the modem...
122 Dialing...
123 Connected.
124 Verifying user name and password...
125 Verifying user name and password...
126 Preparing for callback...
127 Waiting for callback...
128 Logging on to network...
129 Successfully connected.
130 Disconnecting...
131 User name and password verified.
132 Start redialing in %1!d! mins. %2!d! secs.
133 Start redialing in %2!d! secs.
150 Default
151 %d is not a valid entry. Please specify a value between %d and %d for this field.
160 &Details >>
161 No &Details
170 Disconnected from the computer you dialed.
171 The line was busy.
172 The computer you dialed did not answer.
173 There was no dialtone.
201 A %1 connection through %2.
1100 Dial-Up Networking Log On
1101 Cannot start Dial-Up Networking because you have not logged on to the network.\nTo log on, click the Start button and then click Shut Down.
1102 Dial-Up Networking Initialization
1103 No telephony drivers are installed.\nTo install a telephony driver, double-click the Add New Hardware icon in Control Panel. After a telephony driver is installed, try again.
1104 Dial-Up Networking cannot start. Restart your computer, and then try again.\nIf the problem persists, re-install Dial-Up Networking.
1105 Dial-Up Networking
1106 TELEPHON.INI is corrupted.\nReinstall telephony subsystem
1108 The modem is not available: it is either not plugged in, configured incorrectly or another program is using it.\nIf no other programs are using it, check the modem configuration.
1109 Dial-Up Networking could not find the Microsoft Dial-Up Adapter.\nTo install it, double-click the Network icon in Control Panel.
1110 Dial-Up Networking could not find the Microsoft Dial-Up Adapter.\nTo install it, double-click the Network icon in Control Panel.
1111 Cannot find the VGATEWAY.VXD file.\nCopy it from your Windows installation disks to your WINDOWS\SYSTEM folder.
1112 The connection attempt failed.\nTry the connection again.
1113 There is not enough memory available. Close some files or programs, and then try again.
1114 There are not enough system resources. Close some files or programs, and then try again.
1115 The modem is not installed.\nTo install a modem, double-click the Modems icon in Control Panel.
1116 The modem is being used by another Dial-Up Networking connection.\nClose the other connection, and then try again.
1117 Dial-Up Networking cannot configure the modem.\nIf it is used by other programs, disconnect it.\nOtherwise check your device configuration. Then try again.
1118 The modem is being disconnected.
1119 You cannot log on at this time of the day.\nTry again at a time of day your account is set up for.
1120 Your account is not active.\nContact your network administrator.
1121 Your password has expired.\nContact your network administrator.
1122 You do not have dial-in permission.\nChange the permissions on the computer you are dialing in to, or contact your network administrator.
1123 The connection could not be established due to a network problem.\nTry the connection again.
1124 Your computer name is the same as another computer's.\nIf you are connected to a local network, disconnect from it. To rename your computer, double-click the Network icon in Control Panel.
1125 The computer you're dialing in to does not respond to a network request.\nCheck your server type setting in the properties of the connection.\nIf this problem persists, check with your network administrator.
1126 The computer you're dialing in to cannot establish a Dial-Up Networking connection.\nCheck your password, and then try again.
1127 The Dial-Up Networking session could not be established in a reasonable amount of time.\nTry again later.
1128 Your network configuration is incorrect.\nDouble-click the Network icon in Control Panel and make sure that your dial-up network adapter is bound to Microsoft NetBEUI.
1129 The dial-up network adapter for this communication device cannot be found or is corrupted.\nIn the Network section of control panel, remove the driver and then add it again.
1130 You have been disconnected from the computer you dialed.\nDouble-click the connection to try again.
1131 The computer is not receiving a response from the modem.\nCheck that the modem is plugged in, and if necessary, turn the modem off, and then turn it back on.
1132 The modem is not installed or configured for Dial-Up Networking.\nTo check your modem configuration, double-click the Modems icon in Control Panel.
1133 The modem cannot accept a callback because the Dial-Up Server is waiting for a call.\nClick No Caller Access in Dial-Up Server, and try again.
1134 The information about your modem is invalid.\nCreate a new connection, and then try connecting again.
1135 The phone number of the computer you're dialing is invalid.\nRe-enter the phone number.
1136 Cannot connect to the modem.\nTo make sure your modem is configured properly, double-click the Modems icon in Control Panel.
1137 The Dial-Up Networking information in the registry is corrupted.\nTo restore it, shut down and restart your computer.
1138 An essential file is missing.\nReinstall the Dial-Up Networking files.
1139 The Dial-Up Networking connection cannot start verifying user name and password.\nTry the connection again.
1140 Cannot establish the Dial-Up Networking session.\nCheck your server type setting in the properties of the connection, and try the connection again.
1141 Cannot hang up the modem for the computer to call you back.\nHang up the modem, or turn it off and back on.
1142 The modem cannot be set up to accept an incoming call.\nTo check your modem configuration, double-click the Modems icon in Control Panel.
1143 The Dial-Up password for %s is corrupted and set to no password.\nTo enter a new password, click Dial-Up Server on the Connections menu.
1144 Another Dial-Up Networking connection is active.\nDisconnect the other connection, and then try again.
1145 The line is busy.\nTry again later.
1146 The computer you are dialing in to is not answering.\nTry again later.
1147 There is no dialtone.\nMake sure your modem is connected to the phone line properly.
1149 There are not enough resources to re-establish the Dial-Up Networking connection.\nClose one or more files or programs, and then try again.\n
1150 A telephone number is required. Please type the telephone number you want to dial.\n
1151 Another program is dialing the selected connection.
1152 The Microsoft Dial-Up Adapter is not configured to work with the current network configuration. Please check your server type and the network configuration in the Control Panel then try the connection again.
1153 A SLIP connection requires an IP address.\nEnter an IP address.
1154 The IP address you entered is not complete.\nComplete the IP address.
1155 The IP address you entered is invalid.\nRe-enter a new IP address.
1156 The Direct Cable Connection password for %s is corrupted and set to no password.\nTo enter a new password, run Direct Cable Connection and change your setting.
1157 Dial-Up Networking requires at least one network protocol.\nSelect one from the list.
1158 The selected server type requires this network protocol.\nSelect the network protocol.
1159 The modem is not plugged in or out of service.\nConnect a modem to your computer and try again.
1160 You are currently using NetWare servers which will be inaccessible if you establish this connection.\nClick OK to continue dialing. Click Cancel if you do not want to dial at this time.
1161 The modem is being used by another Dial-Up Networking connection or another program.\nDisconnect the other connection or close the program, and then try again.
1162 An address is required.\nEnter an address or a zero in every slot.
1163 The address you entered is not complete.\nComplete the address.
1164 The address you entered is invalid.\nRe-enter a new address.
1300 The Microsoft Dial-Up Adapter is not installed or not responding properly.\nIn the Network section of control panel, remove the driver and then add it again.
1301 Dial-Up Networking could not complete the connection to the server.\nCheck your configuration and try the connection again.
1302 The computer you have dialed in to has denied access because the username and/or password is invalid on the domain.
1303 Dial-Up Networking could not negotiate a compatible set of network protocols you specified in the Server Type settings.\nCheck your network configuration in the Control Panel then try the connection again.
1304 The Microsoft Dial-Up Adapter is in use or not responding properly.\nDisconnect other connections and then try again.\nIf this problem persists, shut down and restart your computer.
1600 Direct Cable Connection
1601 The port is not available: it is either configured incorrectly or another program is using it.\nIf no other programs are using it, run your Direct Cable Connection configuration again.
1602 The computer you're dialing in to has not called back.\nCheck your phone number, and try the connection again.
2100 An operation is pending.
2101 The port handle is invalid.
2102 The port is already open.
2103 Caller's buffer is too small.
2104 Wrong information specified.
2105 Cannot set port information.
2106 The port is not connected.
2107 The event is invalid.
2108 The device does not exist.
2109 The device type does not exist.
2110 The buffer is invalid.
2111 The route is not available.
2112 The route is not allocated.
2113 Invalid compression specified.
2114 Out of buffers.
2115 The port was not found.
2116 An asynchronous request is pending.
2117 The port or device is already disconnecting.
2118 The port is not open.
2119 The port is disconnected.
2120 There are no endpoints.
2121 Cannot open the phone book file.
2122 Cannot load the phone book file.
2123 Cannot find the phone book entry.
2124 Cannot write the phone book file.
2125 Invalid information found in the phone book file.
2126 Cannot load a string.
2127 Cannot find key.
2128 The port was disconnected.
2129 The port was disconnected by the remote computer.
2130 The port was disconnected due to hardware failure.
2131 The port was disconnected by the user.
2132 The structure size is incorrect.
2133 The port is already in use or is not configured for Dial-Up Networking dial out.
2134 Cannot register your computer on the remote network.
2135 Unknown error.
2136 The wrong device is attached to the port.
2137 The string could not be converted.
2138 The request has timed out.
2139 No asynchronous net available.
2140 A NetBIOS error has occurred.
2141 The server cannot allocate NetBIOS resources needed to support the client.
2142 One of your NetBIOS names is already registered on the remote network.
2143 A network adapter at the server failed.
2144 You will not receive network message popups.
2145 Internal authentication error.
2146 The account is not permitted to log on at this time of day.
2147 The account is disabled.
2148 The password has expired.
2149 The account does not have Dial-Up Networking permission.
2150 The Dial-Up Networking server is not responding.
2151 Your modem (or other connecting device) has reported an error.
2152 Unrecognized response from the device.
2153 A macro required by the device was not found in the device .INF file section.
2154 A command or response in the device .INF file section refers to an undefined macro.
2155 The <message> macro was not found in the device .INF file secion.
2156 The <defaultoff> macro in the device .INF file section contains an undefined macro.
2157 The device .INF file could not be opened.
2158 The device name in the device .INF or media .INI file is too long.
2159 The media .INI file refers to an unknown device name.
2160 The device .INF file contains no responses for the command.
2161 The device .INF file is missing a command.
2162 Attempted to set a macro not listed in device .INF file section.
2163 The media .INI file refers to an unknown device type.
2164 Cannot allocate memory.
2165 The port is not configured for Dial-Up Networking.
2166 Your modem (or other connecting device) is not functioning.
2167 Cannot read the media .INI file.
2168 The connection dropped.
2169 The usage parameter in the media .INI file is invalid.
2170 Cannot read the section name from the media .INI file.
2171 Cannot read the device type from the media .INI file.
2172 Cannot read the device name from the media .INI file.
2173 Cannot read the usage from the media .INI file.
2174 Cannot read the maximum connection BPS rate from the media .INI file.
2175 Cannot read the maximum carrier BPS rate from the media .INI file.
2176 The line is busy.
2177 A person answered instead of a modem.
2178 There is no answer.
2179 Cannot detect carrier.
2180 There is no dial tone.
2181 General error reported by device.
2182 ERROR_WRITING_SECTIONNAME
2183 ERROR_WRITING_DEVICETYPE
2184 ERROR_WRITING_DEVICENAME
2185 ERROR_WRITING_MAXCONNECTBPS
2186 ERROR_WRITING_MAXCARRIERBPS
2187 ERROR_WRITING_USAGE
2188 ERROR_WRITING_DEFAULTOFF
2189 ERROR_READING_DEFAULTOFF
2190 ERROR_EMPTY_INI_FILE
2191 Access denied because username and/or password is invalid on the domain.
2192 Hardware failure in port or attached device.
2193 ERROR_NOT_BINARY_MACRO
2194 ERROR_DCB_NOT_FOUND
2195 ERROR_STATE_MACHINES_NOT_STARTED
2196 ERROR_STATE_MACHINES_ALREADY_STARTED
2197 ERROR_PARTIAL_RESPONSE_LOOPING
2198 A response keyname in the device .INF file is not in the expected format.
2199 The device response caused buffer overflow.
2200 The expanded command in the device .INF file is too long.
2201 The device moved to a BPS rate not supported by the COM driver.
2202 Device response received when none expected.
2203 ERROR_INTERACTIVE_MODE
2204 ERROR_BAD_CALLBACK_NUMBER
2205 ERROR_INVALID_AUTH_STATE
2206 ERROR_WRITING_INITBPS
2207 X.25 diagnostic indication.
2208 The account has expired.
2209 Error changing password on domain. Try again.
2210 Serial overrun errors were detected while communicating with your modem.
2211 RasMan initialization failure. Check the event log.
2212 Biplex port initializing. Wait a few seconds and redial.
2213 No active ISDN lines are available.
2214 No ISDN channels are available to make the call.
2215 Too many errors occurred because of poor phone line quality.
2216 ERROR_IP_CONFIGURATION
2217 ERROR_NO_IP_ADDRESSES
2218 ERROR_PPP_TIMEOUT
2219 ERROR_PPP_REMOTE_TERMINATED
2220 ERROR_PPP_NO_PROTOCOLS_CONFIGURED
2221 ERROR_PPP_NO_RESPONSE
2222 ERROR_PPP_INVALID_PACKET
2223 ERROR_PHONE_NUMBER_TOO_LONG
2224 ERROR_IPXCP_NO_DIALOUT_CONFIGURED
2225 ERROR_IPXCP_NO_DIALIN_CONFIGURED
2226 ERROR_IPXCP_DIALOUT_ALREADY_ACTIVE
2227 ERROR_ACCESSING_TCPCFGDLL
2228 ERROR_NO_IP_RAS_ADAPTER
2229 ERROR_SLIP_REQUIRES_IP
2230 ERROR_PROJECTION_NOT_COMPLETE
2231 ERROR_PROTOCOL_NOT_CONFIGURED
2232 ERROR_PPP_NOT_CONVERGING
2233 ERROR_PPP_CP_REJECTED
2234 ERROR_PPP_LCP_TERMINATED
2235 ERROR_PPP_REQUIRED_ADDRESS_REJECTED
2236 ERROR_PPP_NCP_TERMINATED
2237 ERROR_PPP_LOOPBACK_DETECTED
2238 ERROR_PPP_NO_ADDRESS_ASSIGNED
2239 ERROR_CANNOT_USE_LOGON_CREDENTIALS
2240 ERROR_TAPI_CONFIGURATION
2241 ERROR_NO_LOCAL_ENCRYPTION
2242 ERROR_NO_REMOTE_ENCRYPTION
2243 ERROR_REMOTE_REQUIRES_ENCRYPTION
2244 ERROR_IPXCP_NET_NUMBER_CONFLICT
2245 The Session Management Module is invalid.
2246 The Session Management Module is not initialized.
2247 The MAC is not avaliable for this connection.
